产品中心

Products center

首页

配件：数控系统（Main accessories：Multi-channel numerical control system）

发布时间:

2024-01-25

锁壳一体机主要部件（多通道数控系统）： 1、配备15寸触摸显示屏。 2、国际标准CNC编程规范与标准外设通讯模块。 3、主流RT Linux 嵌入式控制系统平台。 4、支持SSI 绝对型编码器，支持MECHATROLINK-III或EtherCAT总线。 5、总线轴与泛用轴混合控制，具备位置、速度、扭矩三种控制方式，可实时切换控制方式，满足更多复杂工艺要求。 6、支持连接多台视觉系统，实现多台相机的图形整合，数据分析，可直接与智能相机连线也可采用 PC-BASE 模式，实现视觉定位、飞拍等功能，更易实现产业自动化控制。 7、工业物联网技术，支持机客制组监控远程网络系统固件升级与协助故障诊断与排除。 8、支持倾斜平面加工，电子仿形等功能，可根据实际需要灵活使用。 9、支持同步控制，卷绕控制等不同高速高精运动控制及定位功能，提高精度以及稳定性。 10、最大16通道组合技术，各通道可独立运行不同的CNC文件、PLCPID、主轴等，并可以任意执行通道之间的同步、等待、数据通讯，大幅度提高工作效率。 11、支持标准TCD协议通讯连接可实时收挖控制器、支持标准TCP协议通讯连接，可实时监控控制器状态，并具备 MDI、DNC、CNC 三种方式加工选择更加灵活方便。 12、具备完善的开发平台，开放式画面编辑软件-HMI，客制化人机设计自动化设备最佳选择。 13、支持开放式宏程序设计-MACRO。 14、支持CAD/ CAM 辅助编程。 Lock all-in-one machine Main accessories（Multi-channel numerical control system） 1. Equipped with a 15-inch touch display. 2. International standard CNC programming specifications and standard peripheral communication modules. 3. Mainstream RT Linux embedded control system platform. 4. Support SSI absolute encoder and MECHATROLINK-III or EtherCAT bus. 5. The hybrid control of the bus shaft and the general axis has three control modes: position, speed and torque, which can switch the control mode in real time to meet more complex process requirements. 6. It supports connecting multiple vision systems to realize the graphic integration and data analysis of multiple cameras. It can be directly connected to smart cameras or use PC-BASE mode to realize visual positioning, flying shooting and other functions, making it easier to achieve industrial automation control. 7. Industrial Internet of Things technology supports machine and customer groups to monitor remote network system firmware upgrades and assist in fault diagnosis and elimination. 8. Support inclined plane processing, electronic imitation and other functions, which can be used flexibly according to actual needs. 9. Support different high-speed and high-precision motion control and positioning functions such as synchronous control and winding control to improve accuracy and stability. 10. With a maximum of 16 channel combination technology, each channel can independently run different CNC files, PLCPID, spindles, etc., and can perform synchronization, waiting and data communication between channels at will, greatly improving work efficiency. 11. Support standard TCD protocol communication connection, real-time mining controller, support standard TCP protocol communication connection, real-time monitoring of controller status, and MDI, DNC, CNC processing options are more flexible and convenient. 12. It has a perfect development platform, open picture editing software-HMI, and the best choice for human-machine design automation equipment. 13. Support open macro programming-MACRO. 14. Support CAD/CAM-assisted programming.

配件：数控系统（Main accessories：Multi-channel numerical control system）

锁壳一体机主要部件（多通道数控系统）：

1、配备15寸触摸显示屏。

2、国际标准CNC编程规范与标准外设通讯模块。

3、主流RT Linux 嵌入式控制系统平台。

4、支持SSI 绝对型编码器，支持MECHATROLINK-III或EtherCAT总线。

5、总线轴与泛用轴混合控制，具备位置、速度、扭矩三种控制方式，可实时切换控制方式，满足更多复杂工艺要求。

6、支持连接多台视觉系统，实现多台相机的图形整合，数据分析，可直接与智能相机连线也可采用 PC-BASE 模式，实现视觉定位、飞拍等功能，更易实现产业自动化控制。

7、工业物联网技术，支持机客制组监控远程网络系统固件升级与协助故障诊断与排除。

8、支持倾斜平面加工，电子仿形等功能，可根据实际需要灵活使用。

9、支持同步控制，卷绕控制等不同高速高精运动控制及定位功能，提高精度以及稳定性。

10、最大16通道组合技术，各通道可独立运行不同的CNC文件、PLCPID、主轴等，并可以任意执行通道之间的同步、等待、数据通讯，大幅度提高工作效率。

11、支持标准TCD协议通讯连接可实时收挖控制器、支持标准TCP协议通讯连接，可实时监控控制器状态，并具备 MDI、DNC、CNC 三种方式加工选择更加灵活方便。

12、具备完善的开发平台，开放式画面编辑软件-HMI，客制化人机设计自动化设备最佳选择。

13、支持开放式宏程序设计-MACRO。

14、支持CAD/ CAM 辅助编程。

Lock all-in-one machine Main accessories（Multi-channel numerical control system）

1. Equipped with a 15-inch touch display.

2. International standard CNC programming specifications and standard peripheral communication modules.

3. Mainstream RT Linux embedded control system platform.

4. Support SSI absolute encoder and MECHATROLINK-III or EtherCAT bus.

5. The hybrid control of the bus shaft and the general axis has three control modes: position, speed and torque, which can switch the control mode in real time to meet more complex process requirements.

6. It supports connecting multiple vision systems to realize the graphic integration and data analysis of multiple cameras. It can be directly connected to smart cameras or use PC-BASE mode to realize visual positioning, flying shooting and other functions, making it easier to achieve industrial automation control.

7. Industrial Internet of Things technology supports machine and customer groups to monitor remote network system firmware upgrades and assist in fault diagnosis and elimination.

8. Support inclined plane processing, electronic imitation and other functions, which can be used flexibly according to actual needs.

9. Support different high-speed and high-precision motion control and positioning functions such as synchronous control and winding control to improve accuracy and stability.

10. With a maximum of 16 channel combination technology, each channel can independently run different CNC files, PLCPID, spindles, etc., and can perform synchronization, waiting and data communication between channels at will, greatly improving work efficiency.

11. Support standard TCD protocol communication connection, real-time mining controller, support standard TCP protocol communication connection, real-time monitoring of controller status, and MDI, DNC, CNC processing options are more flexible and convenient.

12. It has a perfect development platform, open picture editing software-HMI, and the best choice for human-machine design automation equipment.

13. Support open macro programming-MACRO.

14. Support CAD/CAM-assisted programming.

关键词：